DeWalt Drill Drivers

DeWalt DW965K 12v Drill Driver

If you need to drill holes or drive screws in confined spaces, the DeWalt DW965K-2 12v Drill Driver is just the ticket. The distance of this superb 3/8-inch 12-volt right angle drill from top to chuck tip is only 4 inches. The three-position rubber padded switch allows the user to adjust their hand for optimised responsiveness and comfortable use. The DW965K offers a no-load speed of 0 to 400 / 0 to 1,200 rpm with a maximum torque of 180 in./lbs. The kit includes the tool, two DW9072 batteries, a charger, and kit box.

Product Description:
12V, Heavy Duty 3/8" 10MM Right Angle Drill & Driver Kit, 180 Inch LB Maximum Torque, Multi-Grip Rubber Trigger.

Specifications:

- Dual speed gearbox with reverse mode.
- Multiple grip soft touch switch.
- High perfomance fan cooled motor.
- Keyless chuck with electronic brake.
- Power Output 190 Watts
- No. Load Speed 0-400/0-1200 rpm.
- No. Speeds: 2: Variable and reversing
- Max. Torque 20Nm.
- Maximum Drilling Capacities.
- Wood 25 mm
- Metal 10 mm
- Weight. 2.0Kg.

Choose that Perfect Drill!

Superb examples of 12v Cordless Drill Drivers include the Black & Decker CD12CA 12v, Bosch GSR12-2 12v, DeWalt DC7442AV 12v, Hitachi 12DVF3 12v, Makita 312DWDE3 12v, and also the Ryobi CHD1202 12v

In the event that 14.4v Cordless Drill Drivers are more ideal, then be sure to check out the Black & Decker Lithium Ion 14.4v, Bosch PSR14Li-2 Lithium Ion 14.4v, DeWalt DC731KA 14.4v, the Hitachi DS14DVF3 14.4v,Makita BDF441RFE 14.4v, and the Ryobi CHD-1441 14.4v

To cover your your 18v Cordless Drill Drivers requirements, why not view Black & Decker CD18CA 18v, Bosch GSR 18v Drill Driver, DeWalt 920KB 18v Drill Driver, Hitachi DS18DMR 18v Drill Driver, the Makita BDF452RFE 18v Drill Driver or the Ryobi CHP-1802 18v Drill Driver

DIY & Do It Safe

Cordless drill drivers are much less hazardous than corded or electric power tools as there is no cord for you to trip or fall over. Cordless power tools are much more accessible than corded tools as they allow you go anywhere and work in places that would ordinarily be inaccessible due to there being no power socket. Cordless drill drivers are becoming increasingly small and compact in design and are extremely easy to move around and transport. However, the size and weight of a cordless drill driver may vary depending on the battery type. Technological developments have allowed power tool manufacturers to produce cordless drill drivers that have the same voltage and power capacity as electric corded drill drivers.

SDS (Special Direct System) Drills come in two standard sizes and they are SDS Plus (10mm) and SDS-Max (18mm). These sizes relate the size of the shank. SDS Plus is the most common and can withstand a hammer of up to 4Kg, and SDS Max for hammers over 5Kg. SDS Plus grips the drill bit in two places whereas SDS Max grip in three places. With the SDS drill you can use a chuck adaptor that when used enables the use of standard drill bits for rotary drilling. It is wise to avoid SDS Drills that do not have a safety clutch. If the drill bit jams and is unable to turn a safety clutch might prevent the drill body from spinning. This spinning may cause severe damage to the wrist and arm with the possibility of the drill being yanked from your hand, jumping out of the hole and coming into contact with a part of the body. A safety clutch could be high on your list of required features.

Drills come in three distinct handle styles. The most popular cordless models have the T-handle style where the handle is placed close to the middle. The T-handle style distributes the weight for better balance and less wrist strain. Some people still prefer the more traditional pistol-grip style. The third style is the right-angle version, manufactured for use where space is restricted.

Factors such as temperature, the material being drilled, whether the drilling is nonstop or intermittent, and the whether the battery is at full charge or not might affect a cordless drill driver's battery charge. The standard time required to charge a battery pack might vary from one hour to overnight, depending on the type of tool and charger. Recharge when the drop in performance and power is noticeable. Don't wait until the tool quits working to recharge the battery.

Lithium-ion batteries (sometimes abbreviated Li-ion batteries) are a type of rechargeable battery in which a lithium ion moves between the anode and cathode. The lithium ion moves from the anode to the cathode during discharge and from the cathode to the anode when charging.

If a Li-ion battery is stored with too low a charge, there is a risk of allowing the charge to drop below the battery's low-voltage threshold, resulting in an unrecoverable dead battery. Once the charge has dropped to this level, recharging it may be hazardous. Some batteries therefore feature an internal safety circuit which might prevent charging in this state, and the battery might be for all practical purposes dead. In circumstances where a second Li-ion battery is available for a given device, it is recommended that the unused battery be discharged to 40% and placed in the refrigerator to prolong its shelf life. While the battery may be used or charged immediately, some Li-ion batteries might provide more energy when brought to room temperature.

Drilling a hole isn't rocket science but it may be quite frustrating should you don't know how to do it. For example, should you try to use a wood auger bit to drill a hole in metal you'll ruin the bit, score the metal and possibly injure yourself in the process. Drilling a hole correctly, however, is something you may easily accomplish with a little practice.

Not all holes need to go all the way through the material. Some holes need only be a certain depth in the wood. The easiest way to make certain you drill the correct depth is to measure the necessary hole depth on your drill bit. Then mark that point on the bit with a marker or wrap some tape around the bit at the measured spot. Then when you drill only insert the drill bit to the mark or tape. You may also purchase bit collars that slide over the bit and are secured at the suitable depth. The collars usually attach with a small hex wrench or screwdriver. The drilling is undertaken and you have to get the bit out. Give the drill a little power to spin the bit and slowly pull it out of the hole. Don’t be too fast or pull it out without spinning the bit. Either of these may cause the bit to bind in the hole. The hole is complete and now you need to attach the fastener. Bits can be inserted into the drill turning the drill into a screwdriver or wrench. If you are attaching screws determine the size of the screw head and select a matching screwdriver bit. Connect the screwdriver bit to the drill in the same way you would other bits. Put the bit head in the screw head and squeeze the trigger. Be careful not to provide so much power that you go all the way through the material (should that’s not called for) or force the screw head too far down into the material. It’s easy to get carried away with the power of the drill. If you are attaching a bolt fastener you may also purchase bolt sockets that may be attached to the drill. Match the bit size with the bolt, attach the bit to the drill, and screw in the bolt.

With their central point and two spurs, Bullet drills resemble spur point bits, but may be used in metal, wood and plastics. Unlike normal twist drills, the twisted flutes are ground away; making a truer, more accurate bit than normal twist bits. They cut a clean hole and cause little damage when they break through the back of the workpiece. Bit sizes range from 1.5 to 13 mm.

DIY Safety tips:

Keep water away from anything electric. Don't even wash walls without turning off the power at the mains switch. Never be tempted to use a socket, plug or equipment which could still have water in or on it - allowing it to dry could mean the difference between life and death. Read manufacturer's instructions on extension cables - they could overheat should left coiled. Check an extension is suitable for the appliance it is connected to.
When painting, or using any material that generates toxic fumes or dust, keep the room well ventilated. Never smoke while painting or standing close to a freshly painted area.

Don't wait until disaster strikes to find your stop-cocks and gate valves. Opening and closing them four times a year might ensure they easily work when you need them to. Don't let a blown fuse leave you in the dark: keep a repair kit close to your mains fuse box, with a torch - check the batteries regularly - screwdrivers, spare fuses, bulbs and fuse wire, rubber gloves and insulated pliers, a trimming knife and insulating tape.

Do not work with electricity in damp or wet conditions. If you MUST, always use an RCD. Always place the cable of a hedge trimmer or mower over your shoulder and keep it behind you at all times.

Keep the work area tidy. An untidy work environment easily leads to accidents. Offcuts of wallpaper, for example, may be very slippery underfoot. Take care with ladders and access equipment. Ensure that they are properly erected and stable.